Mastering the skills of Haishu’s landing

　　When using sea otters, if the landing point can be accurate, the fishing group can be sent to the nest to increase the probability of the fish, and the nest can be added to create conditions for future fishing, and when the raft is lifted, The bait at the fishing spot can replenish the nest and increase the efficiency of the fish collection. Some people have asked, how to make the Haitang's landing point accurate? How to make the sea otter far away?

　　First of all, we must understand the principle of warfare. A group of hooks, a plumb bob, plus a large group of bait, flying in the air for tens of meters or even nearly 100 meters of power, is the centrifugal force generated during snoring, the size of the centrifugal force determines the distance of flight. Therefore, as long as the flight direction and speed of the centrifugal force are mastered, the distance of the drop point can be controlled to be close and accurate.

　　Secondly, when you are snoring, you must first determine a fixed reference, so that all the fishing rods will hit the same point according to the reference with the same strength. To do this, just do four points and one line. The so-called four-point line is: the tip of the body behind you to your body, and then to the tip of the front and the reference to the other side in the same line. Note that the raised fishing rod must be hanging from the ground, and it is difficult to grasp the slope. This is the most important factor in keeping the placement accurate. Keeping the same snoring position and the same strength is the most important thing to master the placement.

　　Then Haishu is best to choose the same brand, the same length and hardness, so as to avoid the distance gap caused by the different hardness of the fishing rod. Because the centrifugal force generated by the different lengths of the fishing rods is very different, using the same strength to fight, the speed of their tips is different, and the long scorpion runs faster than the short scorpion. In addition, the fishing group is also preferably of the same weight, and the type of the plumb bob and the hook are preferably the same weight, and even the weight of the bait is preferably the same, because as long as there is a little difference, different centrifugal forces are generated.

　　Finally, use the same fisherman. Different sea bream wheels have different diameters and widths, and the depth of the fish wheel troughs is also different, which also affects the fishing line leaving the fish wheel, because the fishing line and the difference between them will produce different friction coefficients. Affect the flight distance of the fishing group. In particular, the depth of the wire trough is different, which determines the time of friction. The longer the friction time, the more functions are consumed, and the closer the distance is. Therefore, winding a fishing line of the same length on the same fish wheel is also a problem to be noted. If your fish wheel is very large, you need to wrap a lot of fishing lines to fill it. In order to reduce friction and facilitate the wire collection, it is recommended that you first use some waste wire wrapped around the fish wheel, occupy some space, and then wrap the line, operate It will reduce some trouble.